Optimasi Pembagian Beban pada Turbin Gas Blok 1 dan Blok 3 PLTGU PT. PJB UP Gresik Menggunakan Metode Iterasi Lambda Berdasarkan Base Point and Participation Factors

Authors

  • Ery Fuji Risnawati UIN Sunan Ampel Surabaya
  • Nurissaidah Ulinnuha UIN Sunan Ampel Surabaya

Keywords:

Electric Power System; Optimation; Lambda Iteration; Base Point and Participation Factors

Abstract

The operation of a good electric power system is needed in the generation system to obtain economical operating costs and optimal load sharing. Optimization of generation can be done by sharing the burden or economic dispatch to get maximum power with minimum costs. The method used is the lambda iteration based on the base point and participation factors for optimal load sharing. In this study, the lambda iteration method based on the base point and participation factors provide more optimal load sharing and lower operating costs than before. The optimal result of load sharing in the case of PT PJB UP Gresik PLTGU is the gas turbine 1.3 in Block 1 and the gas turbine 3.3 in Block 3. In Block 1, the average power generated by the 1.3 turbine gas turbine is 95,449 MW. In Block 3, the average power capable of generating gas turbines is 3.3 89,205 MW. The cost saved after optimization is obtained in the difference in Block 1 of Rp. 395.955.074,64 and Block 3 of Rp. 565.297.532,00.

Downloads

Download data is not yet available.

Downloads

Published

2020-08-31

How to Cite

Ery Fuji Risnawati, & Nurissaidah Ulinnuha. (2020). Optimasi Pembagian Beban pada Turbin Gas Blok 1 dan Blok 3 PLTGU PT. PJB UP Gresik Menggunakan Metode Iterasi Lambda Berdasarkan Base Point and Participation Factors. Jurnal Algebra, 1(1), 187–197. Retrieved from https://jurnalsaintek.uinsby.ac.id/index.php/algebra/article/view/1032

Issue

Section

Articles