Karakterisasi dan Pemilihan Alat Pengendali Limbah Sandblasting di Bengkel Blasting Industri Konstruksi Kapal

Authors

  • Ahmad Erlan Afiuddin Politeknik Perkapalan Negeri Surabaya
  • Ragil Zika Hibriza Politeknik Perkapalan Negeri Surabaya
  • Dwi Ratri Mitha Isnadina Universitas Airlangga

DOI:

https://doi.org/10.29080/alard.v4i2.499

Abstract

Sandblasting waste from the blasting process of ship construction has a high potential to pollute the air and a negative impact to the environment or human health. Nowadays the sandblasting waste from the blasting process of the ship construction industry has not been well managed, Therefore, it is necessary to characterize sandblasting waste and to select and apply an appropriate sandblasting waste control device. Tests was carried out by taking particulate samples in the site with High Volume Air Sampler (HVAS) equipment followed by the Gravimetric method, Scanning Electron Microscopy (SEM) and Atomic Absorbtion Spectrophotometry (AAS). The gravimetric method was used to test the concentration of sandblasting waste with an average yield of 6,654.545 mg/m3. The particulate size obtained from SEM testing was 1.751 to 63.03 µm, testing with the AAS method to get the value of heavy metal content of Fe and Al on average of 1.6375 mg/m3 and 2.2925 mg/m3. Control technology that can use for sandblasting waste are Gravity Settling Chamber or Cyclone for preremoval and Bag Filter or Scrubber or Electrostatic Precipitator as an advance removal.Keywords: ships construction, Sandblasting and Particulate control technology

Downloads

Download data is not yet available.

Downloads

Published

2019-04-18

How to Cite

Afiuddin, A. E., Hibriza, R. Z., & Isnadina, D. R. M. (2019). Karakterisasi dan Pemilihan Alat Pengendali Limbah Sandblasting di Bengkel Blasting Industri Konstruksi Kapal. Al-Ard: Jurnal Teknik Lingkungan, 4(2), 11–17. https://doi.org/10.29080/alard.v4i2.499

Issue

Vol. 4 No. 2 (2019): Maret

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.