PEMANFAATAN SAMPAH PLASTIK DAN ORGANIK DALAM PEMBUATAN PAVING BLOCK MENGGUNAKAN MESIN PRESS

Authors

  • zacky Ubaidillah Mahasiswa
  • Jojo Sumarjo Universitas Singaperbangsa Karawang
  • Eri Widianto Universitas Singaperbangsa Karawang
  • Rizal Hanifi Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.29080/alard.v4i1.412

Abstract

Research has been done on the manufacture and testing of paving blocks with plastic and organic waste materials using a press machine. The purpose of this study is to determine the compressive strength of paving blocks and as a solution for handling waste around us. The results of manual making paving block research with 100% plastic waste, the highest value was 110.4 kg/cm2 and the lowest was 42.2 kg/cm2 and the highest organic mixture was 99.8 kg/cm2 and the lowest was 56.0 kg/cm2. Whereas in the masinal pembutan produce value with 100% plastic waste 113,9 kg/cm2 the lowest value 78,4 kg/cm2. Paving blocks with plastic waste materials are in accordance with SNI quality qualifications. Keywords: plastic waste, organic mixture, paving block, hard test press, machine press.

Downloads

Download data is not yet available.

Downloads

Published

2018-09-30

How to Cite

Ubaidillah, zacky, Sumarjo, J., Widianto, E., & Hanifi, R. (2018). PEMANFAATAN SAMPAH PLASTIK DAN ORGANIK DALAM PEMBUATAN PAVING BLOCK MENGGUNAKAN MESIN PRESS. Al-Ard: Jurnal Teknik Lingkungan, 4(2), 46–52. https://doi.org/10.29080/alard.v4i1.412

Issue

Section

Articles