Pemetaan Dan Perhitungan Pemaparan Tingkat Kebisingan Pada Industri Pengolahan Kayu Di Kecamatan Siak, Provinsi Riau
DOI:
https://doi.org/10.29080/alard.v6i2.1185Keywords:
Noise Mapping, NIOSH, Grid Method, Surfer 13, Wood Processing Industry.Abstract
In its operational activities, CV. X, which is engaged in wood processing, has the potential to cause noise from machines used in the pallet production process. Noise in this company can affect the health and comfort of workers. This study aims to determine the intensity of noise produced by the production machine, the length of time of exposure, noise mapping and noise control efforts. The noise measurement method refers to the noise mapping method and the instrument used is the Sound Level Meter (SLM). The data obtained were then processed into contour maps with variations in blue, green, yellow, purple and red. The results showed the highest noise level was 99.4 dB and the lowest noise level was 67,3 dB. Based on the results of calculations using the NIOSH equation from 128 measurement points of the noise mapping method, there are 38 points with a noise level> 85 dB which indicates the exposure time is above the standard recommended by NIOSH. The highest noise level was 99.4 dB with an exposure time of 0,3 hours and the lowest noise level was 67.3 dB with an exposure time of 475 hours. Control measures that can be made to reduce noise include control from sources, transmission lines, and receivers.
Downloads
References
Arpian, I. D. (2018). Penerapan Alat Pelindung Diri Tangan Pada Pekerja Bagian Produksi. HIGEIA Journal of Public Health Research and Development. Vol. 2, No.3.
Bendtsen, Hans. 2010. Noise Barrier Design: Danish and Some European Examples. Reprint Report: UCPRC-RP-2010-04
Casas, WJP., Cordeiro, EP., Mello, TC and Zannin, PHT. 2014. Noise mapping as a tool for controlling industrial noise pollution. Journal of Scientific & Industrial Research Vol. 73, April 2014, pp. 262-266
Mediastika, C. E. (2005). Akustika Bangunan: Prinsip-Prinsip dan Penerapannya di Indonesia. Jakarta: Erlangga.
Mikulski, W. 2020. Reducing the harmful effects of noise on the human environment. Sound insulation of industrial skeleton enclosures in the 10–40 kHz frequency range. J Environ Health Sci Engineer 18, 1451–1463. https://doi.org/10.1007/s40201-020-00560-2
Nathanail, C.Paul., Bardos, Paul. (2004). Reclamation of Contaminated Land, EPP & Land Quality Press : Nottingham.
National Institute of Occupational Safety Hazards (NIOSH). (1998). Criteria For A Recommended Standard. U.S Department Of Health And Human Service : Ohio.
Peraturan Menteri Negara Lingkungan Hidup Nomor 07 Tahun 2009 tentang ambang batas kebisingan kendaraan bermotor tipe baru.
Peraturan Menteri Tenaga Kerja Dan Transmigrasi Nomor Per.13/Men/X/2011 tentang Nilai Ambang Batas Faktor Fisika Dan Faktor Kimia Di Tempat Kerja.
Priambada, K. D. (2017). Pemanfaatan Limba`123457789p0h Kayu Palet Dalam Penciptaan Hiasan Terarium. Skripsi. Fakultas Bahasa dan Seni, Jurusan Pendidikan Seni Rupa. Universitas Negeri Yogyakarta.
Pullat, B.M.. 1992. Fundamentals of Industrial Ergonomics. Prentice Hall Inc: United States ofAmerica.
Rejeki, S. (2015). Sanitasi, Hygiene, dan K3 (Kesehatan & Keselamatan Kerja). Bandung: Rekayasa Sains.
Sasmita, Aryo., Asmura, J., Ambarwati, NR. 2018. Pengendalian Kebisingan dengan Metode Conceptual Model di Pabrik Kelapa Sawit PT. Tunggal Perkasa Plantations. Jurnal Sains dan Teknologi 17 (2), September 2018: 61 - 68
Standar Nasional Indonesia 7231: 2009. Metoda Pengukuran Intensitas Kebisingan di Tempat Kerja. Jakarta.
Suma’mur. (2009). Higiene Perusahaan dan Kesehatan Kerja (HIPERKES). Jakarta: Sagung Seto
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.